Experience unparalleled connectivity with 3Coptics, your go-to destination for professional optical solutions. Our commitment to excellence extends to providing cutting-edge fiber optics, backed by reliable services and support for your optical network needs. Unlock the full potential of your network with seamless connectivity solutions and dedicated customer support. Choose 3Coptics for advanced optical technology that optimizes and elevates your network performance.wga vape https://wgavape.com 

What’s The Difference Between 100G CLR4 And CWDM4?

CLR4 Alliance
100G CLR4 is a new, open, multi-vendor 100G optics specification created by 100G CLR4 Alliance who consists of end-customers, system companies, and optical companies. It is a low-power, cost-effective, 100G-CWDM solution that routes four 25Gbps optical transmissions down a single-mode fiber for reaches of up to 2km. CLR4 Alliance is designed to address market requirements of large data center customers. CLR4 specification supports FEC (Forward Error Correction) and non-FEC applications.

What’s The Difference Between 100G CLR4 And CWDM4?(图1)

Clause & Players
CLR4 Alliance—Altera, Arista, Aurrion, Brocade, Ciena, ColorChip, Dell, ebay, Fabrinet, Fujitsu, Hewllett-Packard, Huawei, Intel, Juniper Networks, Kaiam, MACOM, Materials Magic, NeoPhotonics, Netronome, Oclaro, Oplink, Oracle, SAE Magnetics, Semtech, Skorpios, Source Photonics, TE Connectivity, VMware, 3ality Technica.

CWDM4 MSA
The CWDM4 MSA (Multi-Source Agreement) targets a common specification for low-cost 100G optical interfaces that run up to 2 km in data center applications. The MSA uses CWDM technology with 4 lanes of 25 Gbps optically multiplexed onto and demultiplexed from duplex single-mode fiber. CWDM4 MSA targets the broad data center 100G interconnects that support FEC applications.

Clause & Players
CWDM4 MSA—Avago Technologies, Brocade, ColorChip, Finisar, HiLight Semiconductor, Hitachi Metals, II-IV Inc, JDSU, Juniper Networks, Kaiam, Mitsubishi Electric, NeoPhotonics, Oclaro, Oplink, SiFotonics, Skorpios, Sumitomo Electric.

100G CLR4 vs CWDM4
As mentioned above, the specifications of the CLR4 and CWDM4 are very similar. Both include FEC, not in the module but as part of the system design, but whereas FEC is fundamental to the CWDM4, it is optional with the CLR4. The 100G CLR4 specification is fully interoperable with the 100G CWDM4 specification for links using FEC. But as FEC only as an option for CLR4, the CLR4 Alliance’s interface avoids the delay associated with FEC, so that it is more suitable to use in applications such as high-frequency trading where latency is an issue. The following table shows us some details about CLR4 vs CWDM4:


Interface

Form Factor

Wavelength

Fiber

Span

 FEC Support

100G CLR4

QSFP28

1310nm window, 20nm spacing

Duplex single-mode fiber
(with LC connector)

Up to 2 km

FEC and non-FEC

100G CWDM4

FEC

Conclusion
100G CLR4 and CWDM4 meet the demands on 2km span of large data center. They are similar enough to be interoperable—the CLR4 is fully interoperable with the CWDM4 for links using FEC. we offers 100GBASE-CWDM4 QSFP28 modules with large stock at very affordable price. For more information, please contact sales@3Coptics.com.





Related Article

Chat

C-light Sales

Skype

Call

sales@3coptics.com

Email

Add to contact

+86 158 1857 3751

Whatsapp
Top