Experience unparalleled connectivity with 3Coptics, your go-to destination for professional optical solutions. Our commitment to excellence extends to providing cutting-edge fiber optics, backed by reliable services and support for your optical network needs. Unlock the full potential of your network with seamless connectivity solutions and dedicated customer support. Choose 3Coptics for advanced optical technology that optimizes and elevates your network performance.wga vape https://wgavape.com

100G DWDM: Choose PAM4 Or Coherent Optics ?

2023-08-28 18:02:12

100G PAM4 QSFP28 vs. Coherent Optics

Coherent CFP/CFP2 transceivers are different from PAM4 QSFP28 modules in some respects. However, they do have some similarities when it comes to 100G network applications.

What Is PAM4 Module?

QSFP28 PAM4 is a technology encoding two bits of data with four distinct signal levels. Previously, the traditional binary NRZ modulation format was used for 40G and 100G long-haul transmission. With four patterns to encode two data bits, the PAM4 modules double the bandwidth of the connection with each signal level representing 2 bits of logic information. It plays a key role in multi-order modulation and makes PAM4 the most efficient and cost-effective enabler of 100G DWDM solutions.

Typically, the common types of PAM4 technology are 50G（1*50G PAM4), 200G（4*50G PAM4), and 400G（8*50G/4*100G PAM4).100G PAM4 QSFP28 transceivers adopt PAM4 modulation technology to achieve high-speed signal transmission and the construction of 100G in large data centers, campuses, and enterprise networks.

100G DWDM: Choose PAM4 Or Coherent Optics ?(图1)

100G PAM4 Signaling Technology

What Is Coherent Technology and Optics?

Coherent technology uses amplitude, phase, and polarization of light to focus more data on the wave that is being transmitted. Thus, much higher bitrates can be achieved on a single wavelength by the adoption of DSP (Digital Signal Processor). CFP DCO (Digital Coherent Optic), CFP2 coherent ACO (Analog Coherent Optic), CFP2 coherent DCO are the common types of transceivers that use coherent technology to achieve 100G DWDM transmission.

CFP DCO: It has an integrated digital signal processing chip (DSP), which means it can improve amplification and receiving sensitivity without a separate DSP and dispersion compensation module (DCM). Besides, the CFP DCO is also equipped with electronic dispersion compensation (EDC), which can realize data transmission beyond 100km.

CFP2 ACO: The width of CFP2 ACO is half of the CFP. It needs a dedicated DSP on the host board because today's CFP2 DWDM transceivers are analog. Therefore, it adds extra power consumption and cost to the mainboard to some degree.

100G CFP2 DCO: Different from the CFP2 ACO, CFP2 DCO has an integrated DSP ASIC, but it is also more expensive. Besides, it can meet the requirements of vendors using CFP2 without DSP and also support better wavelength utilization.

100G DWDM: Choose PAM4 Or Coherent Optics ?(图2)

Coherent Optics Working Principle in DWDM Solution

Advantages ＆ Disadvantages of PAM4 and Coherent Optics

The following chart describes the advantages and disadvantages of QSFP28 PAM4 and coherent modules in 100G DWDM network applications in detail.

100G DWDM: Choose PAM4 Or Coherent Optics ?(图3)

Conclusion

To sum up, both PAM4 modules and coherent optics work effectively in 100G DWDM network transmission. Differently, the 100G PAM4 optical transceivers are more cost-efficient and suitable for transmission below 80km, while the 100G coherent optics are better choices for transmission beyond 100km, but it also has limitations on equipment. Data centers and enterprises can choose any combination of optical modules according to their specific requirements.