Home / FTTH Products >> Fiber Distribution Box >> Wall-Mounted Fiber Distribution Box 32PLC

Wall-Mounted Fiber Distribution Box 32PLC

TheequipmentisusedasaterminationpointforthefeedercabletoconnectwithdropcableinFTTxcommunicationnetworksystem.Thefibersplicing,splitting,distribution can be done in this box,andmeanwhileitprovidessolidprotectionandmanagementfortheFTTxnetworkbuilding

How To Buy
lorem ipsum dolor sit thumb
Features:
1、 Total enclosed structure, nice appearance.
2、 Material: PC and ABS,wet-proof、water-proof、dust-proof、anti-aging,
protection level up to IP65。
3、 Clamping for feeder cable and drop cable, fiber splicing, fixation, storage,
distribution etc., all in one.
4、 Cables, pigtails, patch cords are running through own path without
disturbing each other, cassette type SC/LC/PLC adapter installation, easy
maintenance.
5、 Distribution panel can be flipped up, feeder cable can be placed by
expression port, easy for maintenance and installation.
6、 Cabinet can be installed by the way of wall-mounted or poled-mounted,

suitable for both indoor and outdoor uses.


Specification:
1、Environmental requirement
Working temperature:-40℃~+60℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2、Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3、Thunder-proof technical data sheet
The grounding device is isolated with the cabinet, isolation resistance is less
than 2104 MΩ/500V(DC);IR≥2104 MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V
(DC)/min, no puncture,no flashover;U≥3000V

Room 01, 21F, Prosper Commercial Building, 9 Yin Chong St, Mong Kok, Hong Kong
Copyright@2018 3Coptics Co. Limited. All Rights Reserved.
Privacy Policy | Contact Us